Ultrasnow Unlock 0.93 for 5.12.01 iPhone tested, iPhone 3G unlockdone

Tested it this morning with my iPhone 3G fw. 3.1.3 modem ver. 5.12.01
locked to Globe





requirements:

-Unit must be Jailbroken Cydia installed
-Wi-Fi connection


Press to launch Cydia Installer from your SpringBoard.



Press to select the Manage tab at the bottom of the screen.



Press to select the large Sources button



If the ultrasn0w repo is not present press the Edit button at
the top right of the screen. Otherwise, skip to next step.

How to add ultra snow repo:
-Press the Add button at the top left of the screen.
-Enter http://repo666.ultrasn0w.com/
as the source url and press the Add Source button.
-Once the source has been added press the large Return to Cydia
button.
-Press the Done button at the top right of the screen.

Press to select repo666.ultrasn0w.com from the list of user
entered sources.



Press to select ultrasn0w from the list of packages



Press the Install button at the top right of the screen.



Press the Confirm button at the top right of the screen.








After installation completes successfully press the reboot device tab



Once your unit reboots inserted a different carrier sim





Big thanks Iphone Dev team

Phone |
How to Unlock the iPhone 3G, 3GS
Using UltraSn0w

These are instructions on how to unlock the
iPhone 3G and iPhone 3GS for use with any GSM cellphone carrier using
UltraSn0w. This will work with the iOS 4.0 firmware.

Before you
can follow these instructions you must have a jailbroken
iPhone and you must be on the 04.26.08, 05.11.07, 05.12.01, or 05.13.04
baseband(modem firmware).

To find your firmware and modem
firmware(baseband) versions you can follow this tutorial.

If you are on
T-Mobile remember to turn off 3G before starting...

Step One
Press to launch Cydia
Installer from your SpringBoard.


Step Two
Press
to select the Manage tab at the bottom of the screen.


Step Three
Press
to select the large Sources button


Step Four
If
the ultrasn0w repo is not present press the Edit button at the
top right of the screen. Otherwise, skip to Step Nine.


Step Five
Press
the Add button at the top left of the screen.


Step Six
Enter
http://repo666.ultrasn0w.com/ as the source url and press the Add
Source button.


Step Seven
Once
the source has been added press the large Return to Cydia
button.


Step Eight
Press
the Done button at the top right of the screen.


Step Nine
Press
to select repo666.ultrasn0w.com from the list of user entered
sources.


Step Ten
Press
to select ultrasn0w from the list of packages


Step Eleven
Press
the Install button at the top right of the screen.


Step Twelve
Press
the Confirm button at the top right of the screen.


Step Thirteen
After
installation completes successfully press the large Return to Cydia
button.


Step Fourteen
Now
press the Home button then power off and power on the iPhone.
You do this by holding down the power button for 3 seconds then moving
the power slider that appears to the right. Press the power button
again to turn on the phone.


Step Fifteen
You
should now be able to insert the SIM of your choice!


***THANKS: A big
thank you to all the members of the iPhone Dev-Team for all their hard
work! It is much appreciated by all.